{"title":"New FTIR Sampling Accessories","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhite Bear Photonics is a distributor for FTIR sampling accessories, where we can offer a wide range of FTIR sampling accessories depending on the application.   While used (pre-tested) accessories are often cost effective, they can be limited to what is available (in inventory).  We offer a wide range of new sampling accessories for solids (ATR, film, or reflectance...), liquids (liquid cells, flow cells, ATR...), and gases (10cm to 10m gas cells).  We list our accessories as complete systems for Thermo Nicolet FTIRs, so there is minimal time spent on the configuration.  For example a new diamond ATR would include the base plate, transfer optics, diamond plate and clamp, so there is minimal assembly.  We also offer technical support for the installation, since alignment may be necessary (i.e., instruments are not identical) for optimal performance.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe have a small applications lab with Thermo Nicolet FTIRs, and can offer feasibility experiments based on the accessories we have in-house.  We often recommend using off-the-shelf solutions, both for its value and simplicity.  However there can be situations where an FTIR is needed to analyze materials external to the instrument.  This can require additional engineering or know-how to effectively couple the signal (light) to the detector.\u003c\/p\u003e","products":[{"product_id":"101-00-0003","title":"SurveyIR Reflection\/Transmission Dia ATRDeluxe","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe SurveyIR™ is a new FT-IR Microspectroscopy accessory designed to deliver the ultimate user experience for a broad range of microanalysis techniques. The unique ergonomic design allows seamless interaction between operator and instrument. SurveyIR’s compact configuration and alignment free optical design facilitates simple mounting in the FT-IR spectrometer sample compartment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eUnit is pre-configured for all Thermo Nicolet FTIR models.  Requires a standard FTIR configuration with a room temperature DTGS detector.  The ATR attachment allows analysis of millimeter sized objects where contact is viewed through the diamond crystal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe typical range (for most FTIR models) is 6000-400 cm-1.  However for research grade FTIRs such as the Nicolet 6700 or IS50 the Reflection and Transmission applications can range from 12,000-100 cm-1, depending on the source, beam splitter, and detector type(s) used.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eApplications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFT-IR microspectroscopy of fibers, paints, polymers, fabrics, pharmaceutical active ingredients, excipients, narcotics, explosives and minerals\u003c\/li\u003e\n\u003cli\u003eAnalytical Services\u003c\/li\u003e\n\u003cli\u003eQuality Assurance\u003c\/li\u003e\n\u003cli\u003eScience Education\u003c\/li\u003e\n\u003cli\u003eForensic Labs\u003c\/li\u003e\n\u003cli\u003eDrug Characterization\u003c\/li\u003e\n\u003cli\u003eFiber Analysis\u003c\/li\u003e\n\u003cli\u003eContaminant Identification\u003c\/li\u003e\n\u003cli\u003eSurface Defect Characterization\u003c\/li\u003e\n\u003cli\u003eArt Conservation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cp\u003eTransmission, Reflection and Diamond ATR\u003cbr\u003eTransmission, Reflection, and Oblique Illumination\u003cbr\u003eManual x, y stage fits 1” x 3” standard microscope slides\u003cbr\u003eContact Alert for ATR sample measurements\u003cbr\u003eCourse\/Fine Z focus adjust\u003cbr\u003eDiamond ATR Snap-on plate\u003cbr\u003eIntegrated Digital 5 mega pixel CMOS color video camera\u003cbr\u003eeSpotTM Software (USB 2.0) control and image capture software.\u003cbr\u003eCompatible with WindowsTM 7, 8, 8.1, and 10.\u003cbr\u003eUSB Cable 2.0 cable for software communication and power\u003cbr\u003eVisible Illumination in Reflection, Transmission, and Oblique\u003cbr\u003eBox of 10 low e glass 1x3 reflective slides\u003cbr\u003e2 1x3 13mm 3 hole slides\u003c\/p\u003e","brand":"Red Wave","offers":[{"title":"Default Title","offer_id":39874580807846,"sku":"101-00-0003","price":22250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/SurveyIRIS5.jpg?v=1684764090"},{"product_id":"0019-202-heated-cooled-cell-holder","title":"(0019-202) Heated Cooled Cell Holder","description":"Thermo Part number:  0019-202. Heated-Cooled cell holder with integrated thermo couple. F\u003cspan data-mce-fragment=\"1\"\u003eits all transmission accessories for Thermo Nicolet FTIRs (except IS10, IS20, Summit and IS5).\u003c\/span\u003e Liquid cell with NaCl windows and spacers.  The insulated holder is designed for liquid analysis where temperature control is needed.","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":43332286447782,"sku":"0019-202","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/products\/IMG_0573.jpg?v=1661183049"},{"product_id":"0030-999-thermo-nicolet-smart-collector","title":"(0031-999) Thermo Nicolet Smart Collector","description":"(0031-999) Thermo Nicolet Smart Collector.  Accessory for diffuse reflectance applications.   Includes trays that can accomodate 13 mm pellets, and a gold mirror (for background readings).  As pictured, comes with trays, KBR powder, silicon carbide sampling kit, and quick start manual.   Fits all Thermo FTIRs except IS5 and Summit models.","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":43332581949606,"sku":"0031-999","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/products\/IMG_0582.jpg?v=1661187930"},{"product_id":"0055-391-hatr-horizontal-atr-with-znse-flat-plate","title":"(055-399) HATR Horizontal ATR with ZnSe Flat Plate","description":"HATR Horizontal ATR with ZnSe flat plat and clamp.   Multiple bounces within the ZnSe crystal provides higher sensitivity to powder like materials.  Often used in raw material identification and QC.  Fits all Thermo Nicolet FTIRs except the IS5 and Summit models.","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":43339395399846,"sku":"055-399","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/products\/IMG_0587.jpg?v=1661303701"},{"product_id":"updrift-thermo-smart-nir-updrift-for-near-infrared-diffuse-reflectance","title":"(UPDRIFT) Thermo Smart NIR UpDrift for Near Infrared Diffuse Reflectance","description":"The Thermo Smart NIR UpDrift sampling accessory is designed to measure diffuse reflectance of powder like materials in the Near InfraRed (NIR) region.  The background is taken with a diffuse reflectance puck (as shown).  An FTIR configured with a Tungsten light source, CaF2 beam splitter and InGaAs detector is often used with this accessory.  This accessory works with all Thermo Nicolet FTIRs except the IS5 and Summit models.","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":43339427184806,"sku":"(UPDRIFT)","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/products\/IMG_0592.jpg?v=1661305213"},{"product_id":"0019-200e-220v-heated-cell-mount","title":"(0019-200E) 220V Heated Cell Mount","description":"Thermo 220V Heated Cell Mount.  Designed to heat liquids in transmission.  Requires the standard Thermo Nicolet transmission accessory and heater controller.  Unit can also be used as a standard liquid cell.","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":43391596626086,"sku":"0019-200E","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/products\/IMG_0608.jpg?v=1662143012"},{"product_id":"090-50000-pike-automated-polarizer","title":"(090-50000) Pike Automated Polarizer","description":"Pike Automated motorized Polarizer.  Polarizers are often used in reflectance measurements where either the index, birefringence,  or film thickness of the materials can be characterized.  The motorized system allows for more rapid and repeatable analysis when large numbers of samples are used.  System as shown is an open box item and includes the manual and software needed to control the polarizer.  Polarizer is designed to fit into the standard Thermo Nicolet transmission accessory.","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":43391683494054,"sku":"(090-50000)","price":4000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/products\/IMG_0618.jpg?v=1662145092"},{"product_id":"0019-030-thermo-universal-film-maker","title":"(0019-030) Thermo Universal Film Maker","description":"\u003cp\u003eThe Thermo Universal Film maker is designed to melt and form polymers into uniform thin film.  Film analysis (by transmission) have an advantage of providing high sensitivity and detection of low concentrations of additives as compared with ATR methods.  Films can be made thin or thick based on the application.  Thinner films are often desired with recycled polymers since the absorbance may be higher than that of virgin resins.  Likewise trace additives may be more detectable when using thicker films.  Unit is in new condition and requires a hydraulic press (e.g., \u003cspan data-mce-fragment=\"1\"\u003eCarver Press 4350 0016-042).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":43566087143590,"sku":"0019-030","price":2500.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/products\/0016-010.jpg?v=1665327193"},{"product_id":"surveyir-microscope-unit-for-reflection-and-transmission","title":"SurveyIR Microscope Unit for Reflection and Transmission","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe SurveyIR™ is a new FT-IR Microspectroscopy accessory designed to deliver the ultimate user experience for a broad range of microanalysis techniques. The unique ergonomic design allows seamless interaction between operator and instrument. SurveyIR’s compact configuration and alignment free optical design facilitates simple mounting in the FT-IR spectrometer sample compartment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhile the picture is shown with a Thermo Nicolet IS5 FTIR, it can be pre-configured for all Thermo Nicolet FTIR models.  Minimum requirement is a standard FTIR configuration with a room temperature DTGS detector. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe typical range (for most FTIR models) is 6000-400 cm-1.  However for research grade FTIRs such as the Nicolet 6700 or IS50 the Reflection and Transmission applications can range from 12,000-100 cm-1, depending on the source, beam splitter, and detector type(s) used.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eApplications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFT-IR microspectroscopy of fibers, paints, polymers, fabrics, pharmaceutical active ingredients, excipients, narcotics, explosives and minerals\u003c\/li\u003e\n\u003cli\u003eAnalytical Services\u003c\/li\u003e\n\u003cli\u003eQuality Assurance\u003c\/li\u003e\n\u003cli\u003eScience Education\u003c\/li\u003e\n\u003cli\u003eForensic Labs\u003c\/li\u003e\n\u003cli\u003eDrug Characterization\u003c\/li\u003e\n\u003cli\u003eFiber Analysis\u003c\/li\u003e\n\u003cli\u003eContaminant Identification\u003c\/li\u003e\n\u003cli\u003eSurface Defect Characterization\u003c\/li\u003e\n\u003cli\u003eArt Conservation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSurveyIRTM Base Optical Unit Reflection and Transmission\u003cbr\u003ePart Number Includes:\u003cbr\u003eOptical Unit for transmission and reflection spectroscopy\u003cbr\u003eManual x, y stage fits 1” x 3” standard microscope slides\u003cbr\u003eCourse\/Fine sample focus adjust\u003cbr\u003eIntegrated Digital 5 mega pixel CMOS color video camera, 2592 x 1944 maximum\u003cbr\u003eresolution\u003cbr\u003eCzitek eSpotTM Software (USB 2.0) microscope control and image capture software.\u003cbr\u003eCompatible with WindowsTM 7, 8, 8.1, and 10.\u003cbr\u003eUSB Cable 2.0 cable for software communication and microscope power\u003cbr\u003eTransmission, Reflection, and Oblique Illumination\u003cbr\u003eBox of 10 lowE glass 1x3 reflective slides\u003cbr\u003e2 1x3 13mm 3 hole slides\u003c\/p\u003e","brand":"Red Wave","offers":[{"title":"Default Title","offer_id":44159036424358,"sku":"101-00-0002RT","price":15500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/SurveyIRIS5_69829b8d-1ce9-4815-aef4-dc86cf1801c8.jpg?v=1684765188"},{"product_id":"universal-transmission-accessory","title":"Universal Transmission Accessory","description":"Universal transmission accessory, used to hold IR cards, FTIR standards, liquid cells, and short path-length gas cells.  Fits all Thermo Nicolet FTIR models except the IS5 and Summit.  Base is powder coated steel, and angle bracket is acetal, and makes it resistant to most solvents.  Bracket as shown is adjustable in height and along the optic axis (focal point).","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":44345298878630,"sku":"UT ACCY","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/IMG_1336.jpg?v=1691961919"},{"product_id":"10-cm-ss-gas-cell","title":"10 cm SS Gas Cell","description":"\u003cp\u003e10 cm SS gas cell with CaF2 windows for Thermo Nicolet FTIRs.  Rugged design with Viton O-rings, and Calcium fluoride windows to withstand acidic-aqueous gases.   Simple design makes it easy to disassemble clean and maintain.  1\/4\" Swagelok fittings for connecting to 1\/4 inch poly or SS tubing.  Heater tape and temperature controller can be added for additional protection from contamination.  Standard 38.1 mm windows (off the shelf).  Fits all Thermo Nicolet FTIRs except the IS5 and Summit models.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003ePathelength:  10 cm\u003c\/p\u003e\n\u003cp\u003eSpectral Range:  11,000-900 cm-1\u003c\/p\u003e\n\u003cp\u003eWindows Installed: Wedge 3° CaF2 38.1 x 3mm.\u003c\/p\u003e\n\u003cp\u003eO-Ring Size:  123\u003c\/p\u003e\n\u003cp\u003eO-Ring material:  Viton\u003c\/p\u003e\n\u003cp\u003eGas Connection:  1\/4 inch Swagelok\u003c\/p\u003e\n\u003cp\u003eMax temp:  50 deg C\u003c\/p\u003e\n\u003cp\u003eMax pressure:  1 atmosphere\u003c\/p\u003e\n\u003cp\u003ePort Diameter:  25 mm\u003c\/p\u003e\n\u003cp\u003ePre-configured for all Thermo Nicolet FTIR models except:  IS5 and Summit\u003c\/p\u003e","brand":"White Bear Photonics","offers":[{"title":"Default Title","offer_id":44913385308326,"sku":"GC-10CM-CAF2","price":3600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/IMG_0028.jpg?v=1710451110"},{"product_id":"merlin-automated-diffuse-reflection-system","title":"Merlin Automated Mid-IR \u0026 NIR Diffuse Reflection System","description":"\u003cp\u003eThe Merlin Automated Mid-IR \u0026amp; NIR Diffuse Reflection System is designed for precise, high throughput analysis in the mid-infrared and near-infrared spectral regions.  The system support streamlined workflows streamlined of up to 60 samples. \u003c\/p\u003e\n\u003cp\u003eDiffuse reflections is useful for analysis of powdered samples such as soil, pharmaceuticals, and forensic materials, this accessory features a high-efficiency optical design with an ellipsoidal reflector and an automated R-theta stage for high spectral quality and reproducibility.\u003c\/p\u003e\n\u003cp\u003eKey features include an easily removable sample tray, USB control via PIKE’s intuitive AutoPRO software, and programmable automation for multi-user, high-throughput laboratories. The Merlin ensures minimal user intervention, boosting productivity and data integrity.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMerlin- Automated Reflection System with Gold Coated Optics\u003c\/li\u003e\n\u003cli\u003eMotion Control Unit\u003c\/li\u003e\n\u003cli\u003eAutoPro Software\u003c\/li\u003e\n\u003cli\u003e60 Macro Sample Cups\u003c\/li\u003e\n\u003cli\u003e60 Position Mounting Tray\u003c\/li\u003e\n\u003cli\u003eSample Preparation Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIKE Technologies","offers":[{"title":"Default Title","offer_id":46466678751398,"sku":"PIKE 043-81xx","price":23500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/Merlin.png?v=1753162082"},{"product_id":"easidiff-diffuse-reflection-accessory","title":"EasiDiff Mid-IR Diffuse Reflection Accessory","description":"\u003cp\u003eThe EasiDiff is a high-quality, economical diffuse reflection accessory for FTIR analysis of solid samples, including pharmaceuticals, minerals, and powdered chemicals. Designed for fast and reproducible results, it features permanently aligned optics and micrometer-controlled sample focusing. Switching between background and sample collection is streamlined with a dual-position slide.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlide Mounted Mid-IR EasiDiff Accessory\u003c\/li\u003e\n\u003cli\u003e2 micro sample cups\u003c\/li\u003e\n\u003cli\u003e2 macro sample cups\u003c\/li\u003e\n\u003cli\u003eEasiPrep Sample Preparation Kit\u003c\/li\u003e\n\u003cli\u003eAlignment mirror\u003c\/li\u003e\n\u003cli\u003e35-mm mortar with pestle\u003c\/li\u003e\n\u003cli\u003eKBr powder (100 g)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIKE Technologies","offers":[{"title":"Default Title","offer_id":46466679013542,"sku":"PIKE-042-1000","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/EasyDiff.png?v=1753156800"},{"product_id":"3-position-sample-slide","title":"IR Microscopy Slide","description":"\u003cp\u003eThe IR Microscopy Slide is designed specifically for mid-IR transmission and reflection infrared microscopy applications.  Ideal for researchers and professionals, this slide supports detailed analysis in material science, chemistry, and biological studies, facilitating reliable and reproducible results in infrared microscopy workflows.\u003c\/p\u003e\n\u003cp\u003eThe 3-Position Sample Slide is engineered as a versatile holder for 13-mm windows or gold-surfaced disks, optimized for use with the IR Microscopes in both transmission and reflection analysis. The open port design also accommodates flattened, free-standing fibers for straightforward sample positioning.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 position Slide Holder\u003c\/li\u003e\n\u003cli\u003e13 mm KBr Window\u003c\/li\u003e\n\u003cli\u003e13 mm Gold Surface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIKE Technologies","offers":[{"title":"Default Title","offer_id":46525461954726,"sku":null,"price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/IR_Microscopy_Slide.png?v=1753160767"},{"product_id":"iris-single-reflection-diamond-atr","title":"IRIS – Monolithic Diamond ATR","description":"\u003cp\u003eThe IRIS Single Reflection Diamond ATR by PIKE Technologies is engineered for robust and reliable IR sampling of the broad range of laboratory specimens. Its monolithic diamond crystal withstands challenging samples—including rigid polymers and abrasive powders—while maintaining spectral fidelity across the IR range to 400 cm-1. The unique PTFE seal between the diamond and housing allows measurement of aggressive organics, acids, and bases (pH 1-14). This high-performance accessory is ideal for laboratories conducting routine and advanced FTIR analysis and eliminates the limitations of less durable crystals. Compatible with most laboratory FTIR systems. \u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIris base and mount\u003c\/li\u003e\n\u003cli\u003eDiamond crystal with PTFE seals and stainless steal plate\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Clamp\u003c\/li\u003e\n\u003cli\u003eFlat tip, a swivel tip and a concave tip for clamp\u003c\/li\u003e\n\u003cli\u003eLiquids Retainer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIKE Technologies","offers":[{"title":"Diamond (4000 to 400 cm-1) \/ High-Pressure Clamp","offer_id":56415238389926,"sku":"027-18XX-027-2100","price":7500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/files\/PIKE_IRIS-WBP.png?v=1777144671"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0486\/3796\/8550\/collections\/IMG_0554.jpg?v=1660342862","url":"https:\/\/whitebearphotonics.com\/es\/collections\/new-ftir-sampling-accessories.oembed","provider":"White Bear Photonics","version":"1.0","type":"link"}