(585.15-Q-10/Z15) M6 Ultra-Micro Flow Cell w/ 1mm Round Aperture, Spectrosil Quartz, 10mm, Z15

The fully fused Far UV quartz flow cell body mounted in a threaded anodized aluminum jacket. The aluminum exterior has internally threaded (M6 threading) inlet/outlet ports into which the PTFE flow tubes are connected. This allows for a tight seal between the inlet/outlet tubes and the flow cell body while making connections very easy to change. All cells and tubing connections are tested to 5 bar pressure (75 psi).

The exterior dimensions of the flow cells are made to inter- national standards which should allow their use with commonly available commercial instruments. Almost any UV/Vis spectrophotometer has a cell holder which will work with the flow cells having a pathlength of 10mm or less. For pathlengths greater than 10mm consult your instrument handbook for the correct cell holder to use from your instrument manufacturer.

Type 585.1 and 585.15 are designed to optimize a very small sample volume by using a cylindrical sample chamber with a very small diameter. The diameter of the aperture on the 585.1 series of flow cells is 1 mm and the aperture on the 585.15 series is 1.5mm. The choice of the correct 'Z' dimen­sion for your instrument is critical as you must ensure that the light beam of the instrument passes through the sample chamber of the cell. The cell is designed with a threaded jacket which will accept M6 threaded connectors. Available 'Z' Dimensions are 8.5, 15 (cell height 35mm) and 20mm (cell height 40mm).

M6-SET: Set of extra inlet/outlet tubes with M6 connectors (two tubes per set)