The fully fused Far UV quartz flow cell body mounted in a threaded anodized aluminum jacket. The aluminum exterior has internally threaded (M6 threading) inlet/outlet ports into which the PTFE flow tubes are connected. This allows for a tight seal between the inlet/outlet tubes and the flow cell body while making connections very easy to change. All cells and tubing connections are tested to 5 bar pressure (75 psi).
The exterior dimensions of the flow cells are made to international standards which should allow their use with commonly available commercial instruments. Almost any UV/Vis spectrophotometer has a cell holder which will work with the flow cells having a pathlength of 10mm or less. For pathlengths greater than 10mm consult your instrument handbook for the correct cell holder to use from your instrument manufacturer.
|M6 Flow Cell Tubulation Dimensions|
|OD: 1.6mm||ID: 1mm||Length: 400mm|
Type 585.2 is designed to optimize a small sample volume by using a cylindrical sample chamber with a small diameter. The diameter of the aperture on the 585.2 series of flow cells is 2 mm. The choice of the correct 'Z' dimension for your instrument is critical as you must ensure that the light beam of the instrument passes through the sample chamber of the cell. The cell is designed with a threaded jacket which will accept M6 threaded connectors. Available 'Z' Dimensions are 8.5, 15 (cell height 35mm) and 20mm (cell height 40mm).
M6-SET: Set of extra inlet/outlet tubes with M6 connectors (two tubes per set)
|Description:||Starna Spectrophotometer Micro Flow Cell|
|Physical Configuration:||Flowcell with small volume. The sample chamber is a cylindrical sample chamber drilled through the black cell body with a round window.|
|Primary use:||Absorption measurement in useable range (see charts below) where small sample sized is required.|
|Instrument:||Designed for use in spectrophotometers which can use cells with small apertures. Most modern spectrophotometers can use this cell successfully|
|Path lengths available:||3mm diameter can have 10, 20, 40, 50, 100mm. The 2mm, 1.5mm and 1mm diameter aperture cells are available with 10mm lightpath only.|
|Most commonly used path length:||10 mm|
|Aperture dimensions:||3mm (most commonly used), 2mm, 1.5mm, 1mm diameter|
|Available 'Z' dimensions:||8.5, 15 and 20mm. Click here to check the "Z" dimension for your instrument.|
|Usage note:||The aperture is small but can be used with successfully with most modern spectrophotometers|
|Connections:||M6 threaded connectors. Click here for specifications.|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.